Network-based policies in Cloudflare Gateway

Network-based policies in Cloudflare Gateway

Over the past year, Cloudflare Gateway has grown from a DNS filtering solution to a Secure Web Gateway. That growth has allowed customers to protect their organizations with fine-grained identity-based HTTP policies and malware protection wherever their users are. But what about other Internet-bound, non-HTTP traffic that users generate every day — like SSH?

Today we’re excited to announce the ability for administrators to configure network-based policies in Cloudflare Gateway. Like DNS and HTTP policy enforcement, organizations can use network selectors like IP address and port to control access to any network origin.

Because Cloudflare for Teams integrates with your identity provider, it also gives you the ability to create identity-based network policies. This means you can now control access to non-HTTP resources on a per-user basis regardless of where they are or what device they’re accessing that resource from.

A major goal for Cloudflare One is to expand the number of on-ramps to Cloudflare — just send your traffic to our edge however you wish and we’ll make sure it gets to the destination as quickly and securely as possible. We released Magic WAN and Magic Firewall to let administrators replace MPLS connections, define routing decisions, and apply packet-based filtering rules on network traffic from entire sites. When coupled with Magic WAN, Gateway allows customers to define network-based rules that apply to traffic between whole sites, data centers, and that which is Internet-bound.

Solving Zero Trust networking problems

Until today, administrators could only create policies that filtered traffic at the DNS and HTTP layers. However, we know that organizations need to control the network-level traffic leaving their endpoints. We kept hearing two categories of problems from our users and we’re excited that today’s announcement addresses both.

First, organizations want to replace their legacy network firewall appliances. Those appliances are complex to manage, expensive to maintain, and force users to backhaul traffic. Security teams deploy those appliances in part to control the ports and IPs devices can use to send traffic. That level of security helps prevent devices from sending traffic over non-standard ports or to known malicious IPs, but customers had to deal with the downsides of on-premise security boxes.

Second, moving to a Zero Trust model for named resources is not enough. Cloudflare Access provides your team with Zero Trust controls over specific applications, including non-HTTP applications, but we know that customers who are migrating to this model want to bring that level of Zero Trust control to all of their network traffic.

How it works

Cloudflare Gateway, part of Cloudflare One, helps organizations replace legacy firewalls and upgrade to Zero Trust networking by starting with the endpoint itself. Wherever your users do their work, they can connect to a private network running on Cloudflare or the public Internet without backhauling traffic.

First, administrators deploy the Cloudflare WARP agent on user devices, whether those devices are MacOS, Windows, iOS, Android and (soon) Linux. The WARP agent can operate in two modes:

  • DNS filtering: WARP becomes a DNS-over-HTTPS (DoH) client and sends all DNS queries to a nearby Cloudflare data center where Cloudflare Gateway can filter those queries for threats like websites that host malware or phishing campaigns.
  • Proxy mode: WARP creates a WireGuard tunnel from the device to Cloudflare’s edge and sends all network traffic through the tunnel. Cloudflare Gateway can then inspect HTTP traffic and apply policies like URL-based rules and virus scanning.

Today’s announcement relies on the second mode. The WARP agent will send all TCP traffic leaving the device to Cloudflare, along with the identity of the user on the device and the organization in which the device is enrolled. The Cloudflare Gateway service will take the identity and then review the TCP traffic against four criteria:

  • Source IP or network
  • Source Port
  • Destination IP or network
  • Destination Port

Before allowing the packets to proceed to their destination, Cloudflare Gateway checks the organization’s rules to determine if they should be blocked. Rules can apply to all of an organization’s traffic or just specific users and directory groups. If the traffic is allowed, Cloudflare Gateway still logs the identity and criteria above.

Cloudflare Gateway accomplishes this without slowing down your team. The Gateway service runs in every Cloudflare data center in over 200 cities around the world, giving your team members an on-ramp to the Internet that does not backhaul or hairpin traffic. We enforce rules using Cloudflare’s Rust-based Wirefilter execution engine, taking what we’ve learned from applying IP-based rules in our reverse proxy firewall at scale and giving your team the performance benefits.

Building a Zero Trust networking rule

SSH is a versatile protocol that allows users to connect to remote machines and even tunnel traffic from a local machine to a remote machine before reaching the intended destination. That’s great but it also leaves organizations with a gaping hole in their security posture. At first, an administrator could configure a rule that blocks all outbound SSH traffic across the organization.

Network-based policies in Cloudflare Gateway

As soon as you save that policy, the phone rings and it’s an engineer asking why they can’t use a lot of their development tools. Right, engineers use SSH a lot so we should use the engineering IdP group to allow just our engineers to use SSH.

Network-based policies in Cloudflare Gateway

You take advantage of rule precedence and place that rule above the existing rule that affects all users to allow engineers to SSH outbound but not any other users in the organization.

Network-based policies in Cloudflare Gateway

It doesn’t matter which corporate device engineers are using or where they are located, they will be allowed to use SSH and all other users will be blocked.

One more thing

Last month, we announced the ability for customers to create private networks on Cloudflare. Using Cloudflare Tunnel, organizations can connect environments they control using private IP space and route traffic between sites; better, WARP users can connect to those private networks wherever they’re located. No need for centralized VPN concentrators and complicated configurations–connect your environment to Cloudflare and configure routing.

Network-based policies in Cloudflare Gateway

Today’s announcement gives administrators the ability to configure network access policies to control traffic within those private networks. What if the engineer above wasn’t trying to SSH to an Internet-accessible resource but to something an organization deliberately wants to keep within an internal private network (e.g., a development server)? Again, not everyone in the organization should have access to that either. Now administrators can configure identity-based rules that apply to private networks built on Cloudflare.

What’s next?

We’re laser-focused on our Cloudflare One goal to secure organizations regardless of how their traffic gets to Cloudflare. Applying network policies to both WARP users and routing between private networks is part of that vision.

We’re excited to release these building blocks to Zero Trust Network Access policies to protect an organization’s users and data. We can’t wait to dig deeper into helping organizations secure applications that use private hostnames and IPs like they can today with their publicly facing applications.

We’re just getting started–follow this link so you can too.

Source: Cloudflare

Leave a Reply

Your email address will not be published.


*